Bear Shaped Notice Board

Description

About the Product

Polycolour is manufactured from recycled plastics and has a felt like appearance. It is 9mm thick and ideal for use with pins and staples

Product Description – Silhouette Cut-Out

This silhouette is precision-cut from the size sheet of Polycolour you select from the drop down menu (600 x 900, 1200 x 900mm, 1500 x 1200, 1800 x 1200 2400 x 1200mm)

Please note that while the artwork is produced from the size of the sheet selected, the finished shape will not occupy the full sheet dimensions. The overall cut-out size will be smaller, as we follow the contours of the shape rather than forming a full rectangle. The maximum height and width of the silhouette will fit proportionally within the sheet area. This layout ensures accurate scaling, efficient material use, and a visually balanced silhouette suitable for wall mounting, signage, or decorative display.

About Polycolour Board

The new polycolour notice boards are made from 100% PET plastic which depending on the colour, contain up to 90% post-consumer material. Polycolour FR noticeboards are fire resistant to Class B fire rated by the ASTM E84 test. Polycolour boards are acoustically absorbent panels (Noise Reduction Coefficient of 0.8) with a felt like finish. Polycolour FR are also recyclable in the PET waste stream.

Handling and Storage

Polycolour FR sheets should be stored horizontally with support under full sheets and keep as clean as possible during storage. Both sides of the panel should be kept away from grease, wax, dust and chips that could leave an impression. Polycolour must be stored indoors in a dry cool, well ventilated area and avoid exposure to heat 65°C or greater. Do not store Polycolour FR near radiators, steam pipe or in direct sunlight

Before cutting the sheets. inspect the whole sheet for defects then recover for protection during fabrication. Wear clean gloves when handling the sheets.

Fire Rated Notice Boards

European Standards Class B (Highest Rating)
Class B fire resistant notice boards have been designed and tested to meet the latest European fire regulations EN13501-1:2007+A1:2009 Class B. These notice boards are suitable to be mounted in corridors, stairways, lobbies, escape routes and dead end corridors. Please note the European Class B replaces the British Standard Class O

British Standards Class 1
Class 1 fire resistant notice boards have been designed and tested to meet British Standard BS476 Part 7, Class 1. The boards have a fire resistant material covering/surface and are suitable for offices and classrooms where the risk of fire is minimal. If there is any risk of fire whatsoever then Class B is advised.

Delivery

Delivery normally 5 working days. 

Other Products

Included in the range is a aluminium and wooden framed and also a lockable version.

Please Note

Colours shown on this web site are a digital representation only and may vary from batch to batch. If you have any concerns regarding one of the colours, please call for a sample on 02476 010076. 

Dimensions

Product Description – Silhouette Cut-Out

This silhouette is precision-cut from the size sheet of Polycolour you select from the drop down menu (600 x 900, 1200 x 900mm, 1500 x 1200, 1800 x 1200)

Please note that while the artwork is produced from the size of the sheet selected, the finished shape will not occupy the full sheet dimensions. The overall cut-out size will be smaller, as we follow the contours of the shape rather than forming a full rectangle. The maximum height and width of the silhouette will fit proportionally within the sheet area. This layout ensures accurate scaling, efficient material use, and a visually balanced silhouette suitable for wall mounting, signage, or decorative display.

Delivery

If you require delivery to the Scottish Highlands, or to an off-shore address, please call for a quotation on 02476 010076.

Reviews